How to Get the Red Light Back on My Lush Toy

Getting Started

Turning On/Off:

Press down and hold for 3-5 seconds.

Button Modes:

Charging

Turn off the device before charging. The cable can be plugged into any USB port or USB/AC power adapter to start charging. It will take approximately 85 minutes to fully charge.
The indicator light will stay on while charging. Once it is fully charged, the solid red light will turn off. If you're unsure whether it's fully charged, you can view the battery indicator in the app.

Note:

The magnetic charger will only work if positioned correctly. If a solid red light doesn't turn on, rotate the cable 180 degrees. DO NOT use the toy while charging.

Cleaning & Care

· Clean your massager before and after each use.
· Clean with warm water and a mild soap (or sex toy cleaner).
· Dry thoroughly before storing.
· Keep away from extreme heat or cold.
· DO NOT boil in water (the battery may explode or water could leak into the toy).
· Make sure your toy is recharged at least once every six months.

Lubricant

To avoid any issues, only use water-based lube. DO NOT use silicone or oil-based lubricants. Before insertion, generously apply lube to the product and yourself. Water-based lube may dry out, so you should reapply as needed. We recommend using Lovense Water-Based Lubricant for the best experience.

App Download

Compatible with:

·iPhone/iPad/iPod Touch iOS 10.0 and later
·Android 5.0 and later (with Bluetooth 4.0 enabled)
·Mac (with Bluetooth 4.0 enabled)
·Windows PC (needs a Lovense USB Bluetooth Adapter to connect )

Pairing with Your Devices

Pair with iOS/Android/Mac

1. Press and hold Lush 3's button to turn on the toy. A light will flash to indicate it's on.
2. Click the  icon.
3. Tap "+" to begin searching. After toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your device.

Note:

· You only have to pair your toy once. Next time it should automatically connect to your smartphone.
· This icon shows the signal of the connection. It will switch to this one if it disconnects. If paired, it will automatically reconnect.

Pair with PC

1. Press and hold Lush 3's button to turn on the toy. A light will flash to indicate it's on.
2. Plug the Lovense USB Bluetooth Adapter into a free USB port on your computer.
3. Click the  icon.
4. Tap "+" to begin searching. After toy is found, tap "Done". The light will stay on to indicate it's connected. Your toy can now be controlled with your PC.

Connecting With A Partner

1. Go to the "Long-Distance" tab.
2. Tap "+" to add a contact. Enter their username and tap "Add".
3. After your partner accepts the request, they will show up in this tab.

Note:

· When messaging, press the button to view control options.

· You have the ability to adjust the settings for each partner. Click the "Settings" to adjust your preferences.

Turning the Light ON/OFF

1. After successfully pairing Lush 3 with your phone, tap on the Lush 3 panel in the My Toys section.
2. Tap the toggle next to the "Enable/Disable LED" option.

How to program

• 1. After successfully pairing Lush 3 with your phone, tap on the Lush 3 panel in the My Toys section.
  
• 2. Tap "Program" button to see the programming options.
• 3. Tap "Adjust Levels" to adjust the first three levels.
• 4. Tap "Create New Pattern" to add a preset pattern onto Lush 3.

Troubleshooting

How to Get the Red Light Back on My Lush Toy

Source: https://www.lovense.com/guide/lush3

Share this post